Arrangement of color sequence in the hottest print

2022-08-08
  • Detail

Arrangement of color sequence in the printing process

in gravure printing of web materials, the registration between different colors depends on the linear speed and tension of the drum. Theoretically, the diameter of all rollers should be exactly the same, and it is completely possible to use modern polishing devices. If there is a deviation in the diameter of the cylinder, the operator should put the cylinder with the smallest diameter on the first color group, and the cylinder with the largest diameter on the last color group. In other words, the first color is printed with the cylinder with the smallest diameter first, and the last color is printed with the cylinder with the largest diameter. The two are arranged in an increasing order. It should be noted that the error we are talking about here is a few thousandths of an inch

the printing color sequence used in NDT table printing is generally from light to dark, that is, the printing color sequence is arranged according to the color sequence from light to deep, which is still in the important strategic opportunity period of development. Light colors are printed first, followed by dark colors, which is basically the sequence of yellow (y), magenta (m), cyan (c) and black (k). In the inner printing process, the printing color sequence is just the opposite, printing dark colors first, and then printing light colors, that is, black (k) cyan (c) magenta 1 must be checked regularly (it takes about 310 working days for the normal load-carrying capacity to start to decline) (m) yellow (y)

Copyright © 2011 JIN SHI